Apple, Computers, Linux, Open-source, Ruby, Software, Thoughts, Web

PostgreSQL for Ruby on Rails on Ubuntu

My new desktop came in at work this week, and the installation was painless thanks to the great driver support of Ubuntu 11.10. For anyone setting up a Rails development box based on Linux, I have some tips to get around some pain points when using a PostgresSQL database.


Postgres can be quickly and easily installed using apt-get on Debian or Ubuntu based distributions. Issue the command:

apt-get install postgresql

Ruby Driver

In order for Ruby to connect to PostgreSQL databases, you will need to install the pg gem. This gem will need the development package of PostgreSQL to successfully build its native extension. To install the PostgreSQL development package, issue the following command:

apt-get install libpq-dev # EDIT: postgresql-dev was replaced by this package on Ubuntu 11.10

Setup A PostgreSQL Role

You can configure PostgreSQL to allow your account to have superuser access, allowing your Rails tasks to create and drop databases. This is useful for development, but is strongly discouraged for a production. That being said, we can create a PostgreSQL role by logging into psql as postgres as follows:

su postgres -c psql

This will open a PostgreSQL prompt as the database owner postgres. Next, we need to create an account for our user. This should match the response from “whoami”:

create role  superuser login;

We can now exit from psql by issuing “q“. Try to connect to psql directly by issuing the following command from your shell account:

psql postgres

This should allow you to connect to the default database postgres without being prompted for credentials. You should now be able to issue the rake commands for creating, and dropping the database:

rake db:create

Rspec Prompts for Credentials

I was being prompted by Rspec for credentials when running my test suite. If you would like to remove this credential prompt, please read the following:

There are differences in how the PostgreSQL package is configured in Homebrew on OS X, and how it is packaged in the Ubuntu and across other distributions. One difference is in the level of security configured in the pg_hba.conf file. This file is responsible for identifying which sources using which authentication mechanisms should be allowed or denied. By default, Rspec will cause a prompt for a password even if your shell account has trusted permissions. This is because Rspec connects not as a local process, but to localhost. To allow connections to localhost to be trusted, you will need to modify the pg_hba.conf file.

Next, we can modify the pg_hba.conf file located at /etc/postgresql/<version>/main/pg_hba.conf

Comment out the lines any lines at the bottom of the file and append the following:

local   all             all                                      trust
host    all             all                trust
host    all             all              ::1/128                 trust

This will allow connections from the shell, as well as connections to (localhost) using both IPv4 and IPv6.

You will need to restart PostgreSQL for the changes from this file to take affect:

/etc/init.d/postgresql restart

PostgreSQL Extensions

If you want to make use of any of the additional extensions to Postgres, including fuzzystrmatching, you will need to install the postgresql-contrib package:

apt-get install postgresql-contrib

The extensions will install to /usr/share/postgresql/<version>/extension/

Using the Postgres version 9, you can create these extensions in your database by using the new CREATE EXTENSION syntax. In the case of the fuzzystrmatch extensions, you can issue the following command from inside a PostgresSQL command prompt to load the extensions:

psql ;

Once inside your database:

create extension fuzzystrmatch;
Computers, Linux, Open-source, Ruby, Software, Web

Setup PostgreSQL with Rails on Linux

Today, I found myself needing to setup a Rails application to work with the PostgreSQL database. I found that the documentation on the PostgreSQL website was like drinking from a fire hose. Worse was every community response for an error message has a slightly different approach to the solution. Lets run through a basic Rails PostgreSQL configuration assuming Rails 3, Postgres 8.x, and Ubuntu 11.04:

Step 1: Installing PostgreSQL and Libraries

Install the PostgresSQL server, the client package to connect (psql), and the pg library needed to compile the Ruby PostgreSQL driver:

$ sudo apt-get install postgresql postgresql-client libpq-dev

After this finishes installing, you can turn to your OS X co-worker and laugh at him while he is still downloading the first tarball file. PostgreSQL will start automatically, under the user postgres. You can verify that the installation is a success by using the psql command line utility to connect as the user postgres. This can be accomplished using the following command:

$ sudo -u postgres psql

This uses sudo to elevate your basic user privileges, and the “-u” switch will execute the following command as an alternate user. As the postgres user, this will run psql. If you connect successfully, you should be at the psql interactive prompt. If not, ensure PostgreSQL is running, and that psql is in the path for postgres.

Note: From the psql interactive prompt, type “q” to exit.

Step 2: Configure a New PostgreSQL database

From the psql prompt, you can run SQL to view the current PostgreSQL users:

select * from pg_user;

You should see a table of database users returned:

usename usesysid usecreatedb usesuper usecatupd passwd valuntil useconfig
postgres 10 t t t ********    

(1 row)

We can see the postgres user that was created automatically during the installation of PostgreSQL. Lets add another user to be an owner for our Rails database. The path of least resistance may be to use your shell account username, since it will keep us from having to change some options in the database configuration file.

$ sudo -u postgres createuser 
# Shall the new role be a superuser? (y/n) n
# Shall the new role be allowed to create databases? (y/n) y
# Shall the new role be allowed to create more new roles? (y/n) n

This will create a new database user (named your shell account name), and grant that user access to login to the database. This will ask you a few questions regarding the user account. It is important for Rails that you answer “y” to whether the user should be able to create databases. If you say no, you will not be able to run any rake tasks that create or drop the database.

We can confirm by selecting from the pg_user table again.

$ sudo -u postgres psql
select * from pg_user;
usename usesysid usecreatedb usesuper usecatupd passwd valuntil useconfig
postgres 10 t t t ********    
<username> 16391 f f f ********    

(2 rows)

Step 3: Configure Rails

Switching to the Rails side, lets configure our application for Postgres. This requires the pg gem. Open your Gemfile and append:

# Gemfile
gem "pg"

Now run bundle install to update your project gems.

$ bundle install

This should compile the Ruby pg database driver, allowing Ruby to talk to Postgres. Now, lets tell our Rails application how to access our database. Open up config/database.yml, and change the adapter line to read “postgresql”. The database name by convention is the name of your project plus “_development”. Finally, your shell username is needed. Because PostgreSQL will authenticate this account locally, you will not need to supply a password option. Delete this line.

# config/database.yml
  adapter: postgresql
  encoding: unicode
  database: _development
  pool: 5

To test, run the rake task to create your database:

rake db:create

If everything works, you should have a newly created database owned by your shell account. You can login using psql by passing the name of the database as an option:

$ psql -d _development

Happy migrating!


If you get the error: “FATAL: Ident authentication failed for user “, ensure that you can see your newly created account in the pg_user table of the postgres database. (See Step 2 above)

If you get the error: “PGError: ERROR: permission denied to create database”, then ensure that your database user account has been granted the privilege CREATE. This can be done during the “createuser” command line account creation by answering “y” to the corresponding question about this permission.

If you get the error: “FATAL: role is not permitted to log in”, try manually granting the privilege to login on your database user account. This can be done by executing the following as postgres in the psql prompt:


Notes on Alternative Authentications

PostgreSQL integrates very deeply into the Linux authentication world, allowing for quite an array of connection options. By default passwords are not accepted for local connections. Instead, PostgreSQL is configured to use the “ident sameuser” method of user authentication. See more at